China Good quality CZPT Wheel Loader Bevel Gear 41c0605X1 worm gearbox

Product Description

Liugong Wheel Loader Bevel Gear 41c0605X1

product details

 

NAME MODEL   NOTE
oil filter     Engine Model C6121
Fuel Filter     Engine Model C6121
Air Filter     Engine Model WD615 WD10
oil filter     Engine Model WD615 WD10
Fuel Filter     Engine Model WD615 WD10
Fuel Filter     Engine Model WD615 WD10
Air Filter     Engine Model TD226B
oil filter     Engine Model TD226B
Fuel Filter     Engine Model TD226B
Filter     hydraulic system
transmission filter     ZF4WG180  4WG200
convert filter       
back oil filter  FL936    
back oil filter      
filter      
combination lamp switch      
Left Front Lamp      
Right Front Lamp      
hand brake valve      
power switch       
combination valve FL936 FL958 FL956    
door lock  FL936 FL958 FL956    
stater switch FL936 FL958 FL956    
Air-conditioning compressor FL936 FL958 FL956    
steering cylinder seal kit FL958G    
Bucket cylinder seal kit FL958G    
Boom cylinder seal kit FL958G    
steering cylinder seal kit FL956    
Bucket cylinder seal kit FL956    
Boom cylinder seal kit FL956    
steering cylinder seal kit FL936    
Bucket cylinder seal kit FL936    
Boom cylinder seal kit FL936    
MIRROR (with Frame) FL936 FL958 FL956    
MIRROR (without Frame) FL936 FL958 FL956    
air booster pump FL936    
brake pads(stype 1) widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
brake pads(stype 2) widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
brake caliper (stype 1) widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
brake caliper (stype 2) widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
Brake caliper piston (stype 1) widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
Brake caliper piston (stype 2) widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
FRONT DRIVEN SHAFT FL936    
MIDDLE DRIVEN SHAFT support FL936    
REAR DRIVEN SHAFT FL936    
MAIN DRIVEN SHAFT FL936    
speed pump widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50
speed control valve widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50
input gear  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
over clutch assy widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
oil pan  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
driving shaft, steering punp widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
shaft gear  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…   ZL40 50 transmission
first gear piston widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
first gear inner rim widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
sun gear  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
frictional plate spacing bracket widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
pinion carrier astern widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
piston  widely used for CHINAMFG CHINAMFG CHINAMFG XGMA…    
thrust plate      
driving plate      
cylinder      
transmission gasket seal kit used for CHINAMFG CHINAMFG CHINAMFG LONKING…    
brake disk FL958 FL956 CHINAMFG LG956 LG958 LG953    
brake disk FL936 CHINAMFG LG936    
brake disk FL936 LW300FN    
PLANET PINION CARRIER FL956 FL958 CHINAMFG LG956    
PLANET PINION CARRIER FL936 LG936    
PLANET GEAR FL956 FL958 CHINAMFG LG956    
PLANET GEAR FL936 LG936    
PLANET PINION SHAFT FL956 FL958 CHINAMFG LG956    
PLANET PINION SHAFT FL936 LG936    
ROLLER PIN 5X45 FL956 FL958 CHINAMFG LG956    
ROLLER PIN 4X38 FL936 LG936    
sun gear  FL956 FL958 CHINAMFG LG956    
sun gear  FL936 LG936    
bolt and nut for Wheel rim FL956 FL958 CHINAMFG LG956    
bolt and nut for Wheel rim FL936 LG936    
AXLE RING GEAR FL956 FL958 CHINAMFG LG956    
AXLE RING GEAR FL936 LG936    
FRONT MAIN DRIVE FL956 FL958 CHINAMFG LG956    
FRONT MAIN DRIVE LG936    
FRONT MAIN DRIVE FL936    
bevel gear assy FL956 FL958 CHINAMFG LG956    
bevel gear assy LG936    
bevel gear assy FL936    
GEAR PINION FL956 FL958 CHINAMFG LG956    
GEAR PINION LG936    
GEAR PINION FL936    
half shaft gear FL956 FL958 CHINAMFG LG956    
half shaft gear LG936    
half shaft gear FL936    
CROSS AXLE FL956 FL958 CHINAMFG LG956    
CROSS AXLE LG936    
CROSS AXLE FL936    
differential assy FL956 FL958 CHINAMFG LG956    
differential assy LG936    
differential assy FL936    
air booster pump FL958 FL956    
air booster pump FL936    
air booster pump SDLG LG933 LG936    
air booster pump SDLG LG953 LG956 LG958    
engine oil pressure sensor FL958 FL956    
reverse light switch FL956 FL958 FL936    
reverse horn  FL956 FL958 FL936    
speaker horn FL956 FL958 FL936    
air pressure meter  SDLG CHINAMFG CHINAMFG CHINAMFG ALL USED    
Voltage Meter SDLG CHINAMFG CHINAMFG CHINAMFG ALL USED    
engine oil pressure SDLG CHINAMFG CHINAMFG CHINAMFG ALL USED    
fuel meter  SDLG CHINAMFG CHINAMFG CHINAMFG ALL USED    
water temperature meter  SDLG CHINAMFG CHINAMFG CHINAMFG ALL USED    
Oil  temperature meter  SDLG CHINAMFG CHINAMFG CHINAMFG ALL USED    
alternator FL936  LG936    
alternator FL956 FL958 LG953 LG956 LG958    
alternator FL958G LG956L    
stater FL936  LG936    
stater FL956 FL958 LG953 LG956 LG958    
stater FL958G LG956L    
upper hinge pin FL936   Frame Hinged system
cover for upper hinge pin FL936    
nut for upper hinge pin FL936    
seal for upper hinge pin  FL936    
lower hinge pin  FL936    
seal for lower hinge pin  FL936    
cover for lower hinge pin  FL936    
bearing for upper and lower hinge pins FL936    
       
upper hinge pin FL958    
lower hinge pin       
Break Pads SDLG CHINAMFG CHINAMFG CHINAMFG LONKING    
Break Pads SDLG CHINAMFG CHINAMFG CHINAMFG LONKING    
Break Pads ONLY FOR LiuGong     
Break Caliper  SDLG CHINAMFG CHINAMFG CHINAMFG LONKING    
Break Caliper  SDLG CHINAMFG CHINAMFG CHINAMFG LONKING    
Break Caliper  ONLY FOR LiuGong    
middle teeth     LiuGong ZL50C CLG856 CLG862
right side teeth     LiuGong ZL50C CLG856 CLG862
left side teeth     LiuGong ZL50C CLG856 CLG862
teeth sleeve     LiuGong ZL50C CLG856 CLG862
widely Used For CHINAMFG CHINAMFG CHINAMFG …5T Wheel loader     Head gasket
widely Used For CHINAMFG CHINAMFG CHINAMFG …5T Wheel loader     All The Seal Kit
widely Used For CHINAMFG CHINAMFG CHINAMFG …5T Wheel loader     Head gasket
widely Used For CHINAMFG CHINAMFG CHINAMFG …5T Wheel loader     All The Seal Kit
widely Used For CHINAMFG CHINAMFG CHINAMFG …3T Wheel loader     Head gasket
widely Used For CHINAMFG CHINAMFG CHINAMFG …3T Wheel loader     All The Seal Kit
widely Used For CHINAMFG CHINAMFG CHINAMFG …3T Wheel loader     Head gasket
widely Used For CHINAMFG CHINAMFG CHINAMFG …3T Wheel loader     All The Seal Kit

HangZhou CHINAMFG Mechanical & Electrical Equipment Co. Ltd, the authorized dealer of
Cummins (China) Investment Co., Ltd (CCI), established in 2015 by Mr. Jordan Wang who had rich experience in CHINAMFG engine, CHINAMFG generator and related market,  especially mine, O&G, marine, construction machinery, etc., as a sales director,Jordan worked in CHINAMFG for 8 years.
 
Raptors specializes in supplying CHINAMFG all series genuine parts and engine whole goods, such as B/QSB3.3, ISF2.8/3.8, ISG, ISB/QSB4.5, 6BT,6CT, ISB/QSB6.7,QSL9, QSM/ISM/M11, NTA855, QSX15, QSK19, QSK23, VTA28, QST30, KTA19, KTA38, KAT50, QSK60,QSK78,etc;
 
Jordan had been responsible for mine market for 4 years during working in CHINAMFG china, so CHINAMFG has very good relationship with CHINAMFG who is the joint venture with TEREX, could supply CHINAMFG parts, such as parts for 3305, 3307, TR50, TR60, TR100, and MT3600, MT3700, NTE150, NTE200, NTE240, NTE260; also supplying construction machinery parts from SANY, XCMG, LIUGONG, XIHU (WEST LAKE) DIS., SDLG, CHINAMFG and CHINAMFG etc.
 
Raptors, located in No. 789, Xihu (West Lake) Dis. Road, East of Xihu (West Lake) Dis. Industry, HangZhou, ZheJiang ,
China (Mainland), is just 2 km away from CHINAMFG (China) Investment Co., Ltd,
HangZhou Branch, We could make sure the fast delivery and enough inventories, also reasonable price.
 
Our business scopes:
1, CHINAMFG genuine parts and engine overhaul
2, ZheJiang Fleet guard filters and US Fleet guard filters.
3, HOLSET turbocharger series
4, China CHINAMFG parts series
5, construction machinery parts
 
Thanks for the high quality, fast delivery, reasonable price, CHINAMFG already exported to Finland, Sweden, Germany, Netherland, Czech Republic, France, Romania,
Malaysia, Indonesia, Thailand, Libya, UAE, IRAN, Algeria, etc. if interested in any of our products, please contact us right now; we are always serving you at any time.

 

Application: Wheel Loader
Layout: Three-Ring
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Stepless
Type: Worm Gear Box
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bevel gear

Are bevel gears suitable for high-torque applications?

Bevel gears can indeed be suitable for high-torque applications, depending on various factors such as the specific design, material selection, and proper application engineering. Here’s a detailed explanation:

Bevel gears are known for their ability to transmit power between intersecting shafts at different angles. They can handle significant torque loads and are commonly used in applications that require high-torque transmission. However, the suitability of bevel gears for high-torque applications depends on the following factors:

  • Design: The design of the bevel gears plays a crucial role in their ability to handle high torque. Factors such as tooth profile, size, and geometry impact the load-carrying capacity and torque transmission capability. Bevel gears with robust and optimized designs, including suitable tooth profiles and adequate tooth engagement, can effectively handle high-torque applications.
  • Material Selection: The choice of materials for bevel gears is critical in high-torque applications. Gears need to be made from materials with high strength, hardness, and wear resistance to withstand the forces and stresses involved in transmitting high torque. Common materials used for bevel gears include alloy steels, carburizing steels, and specialty alloys. Material selection should consider the specific torque requirements, operating conditions, and anticipated loads to ensure the gears can handle the desired torque levels.
  • Lubrication: Proper lubrication is essential for reducing friction, wear, and heat generation in high-torque bevel gear applications. Adequate lubrication helps maintain a lubricating film between the gear teeth, minimizing metal-to-metal contact and associated losses. The lubricant type, viscosity, and replenishment schedule should be selected based on the torque and operating conditions to ensure effective lubrication and minimize gear wear.
  • Gear Size and Ratio: The size of the bevel gears and the gear ratio can influence their torque-handling capability. Larger gears generally have greater tooth strength and load-carrying capacity, making them more suitable for high-torque applications. The gear ratio should also be considered to ensure it is appropriate for the desired torque transmission and to avoid excessive loads on the gears.
  • Operating Conditions: The operating conditions, including speed, temperature, and shock loads, must be taken into account when determining the suitability of bevel gears for high-torque applications. Higher speeds and extreme operating temperatures can affect the gear material properties, lubrication performance, and overall gear system efficiency. Proper cooling, temperature control, and gear protection measures should be implemented to maintain reliable performance under high-torque conditions.

By considering these factors and properly engineering the bevel gear system, it is possible to utilize bevel gears in high-torque applications effectively. However, it is crucial to consult with experienced engineers and perform thorough analysis and testing to ensure the gears can handle the specific torque requirements of the application.

bevel gear

What are the potential challenges in designing and manufacturing bevel gears?

Designing and manufacturing bevel gears can present several challenges due to their complex geometry, load requirements, and manufacturing processes. Here’s a detailed explanation of the potential challenges:

When it comes to designing and manufacturing bevel gears, the following challenges may arise:

  • Complex Geometry: Bevel gears have intricate geometry with non-parallel and intersecting tooth profiles. Designing bevel gears requires a thorough understanding of gear theory, tooth engagement, and load distribution. The complex geometry poses challenges in determining the optimal tooth profile, tooth contact pattern, and gear ratios for the specific application.
  • Load Analysis and Distribution: Determining the correct load analysis and distribution is crucial to ensure the gears can handle the anticipated forces and torques. Bevel gears often encounter varying loads, including radial loads, axial loads, and bending moments. Accurately predicting and distributing these loads across the gear teeth is essential for achieving proper gear strength, minimizing wear, and preventing premature failure.
  • Manufacturing Precision: Bevel gears require high manufacturing precision to ensure smooth operation, minimal backlash, and efficient power transmission. Achieving the required precision in gear manufacturing involves precise machining, grinding, and heat treatment processes. The complex geometry of bevel gears adds to the manufacturing complexity, necessitating specialized equipment and skilled operators.
  • Alignment Challenges: Proper alignment of bevel gears is critical for optimal performance and longevity. Achieving accurate alignment can be challenging due to the non-parallel shafts and intricate tooth profiles. Misalignment can lead to increased noise, vibration, and premature wear. Design considerations for alignment, as well as careful assembly and alignment procedures during manufacturing, are necessary to address this challenge.
  • Lubrication and Cooling: Bevel gears require effective lubrication to minimize friction, wear, and heat generation. Ensuring proper lubrication and cooling can be challenging due to the unique shape of bevel gears and the limited space available for lubricant circulation. Designing appropriate lubrication systems, selecting suitable lubricants, and considering heat dissipation methods are essential for maintaining optimal gear performance and preventing overheating.
  • Quality Control: Maintaining consistent quality during the manufacturing process is crucial for reliable bevel gears. Implementing robust quality control measures, including dimensional inspections, surface quality assessments, and gear testing, helps ensure that the manufactured gears meet the specified requirements. Consistency in gear quality is essential to minimize variations in performance and to ensure accurate gear meshing and load distribution.

Addressing these challenges requires a combination of engineering expertise, advanced manufacturing techniques, and quality control processes. Collaborating with experienced gear designers, employing state-of-the-art manufacturing technologies, and conducting thorough testing and analysis can help overcome these challenges and produce high-quality bevel gears that meet the performance and durability requirements of the intended application.

bevel gear

What are the applications of a bevel gear?

A bevel gear finds applications in various industries and mechanical systems where changes in direction or speed of rotational motion are required. Here’s a detailed explanation of the applications of a bevel gear:

  • Automotive Industry: Bevel gears are widely used in the automotive industry, particularly in differentials. Differentials are responsible for distributing torque between the driving wheels of a vehicle, allowing them to rotate at different speeds when turning. Bevel gears in differentials transmit power from the engine to the wheels, enabling smooth cornering and improved traction.
  • Mechanical Power Transmission: Bevel gears are employed in mechanical power transmission systems to change the direction of rotational motion. They are used in applications such as power tools, machine tools, conveyors, and printing presses. By meshing with other bevel gears or with spur gears, they transmit torque and power efficiently from one shaft to another, accommodating changes in direction and speed.
  • Marine Propulsion Systems: Bevel gears are extensively used in marine propulsion systems, including boats and ships. They are commonly found in the propulsion shaft line, where they transmit torque from the engine to the propeller shaft, allowing the vessel to move through water. Bevel gears in marine applications are designed to withstand high loads, resist corrosion, and operate efficiently in harsh environments.
  • Aerospace Industry: Bevel gears are utilized in various aerospace applications. They are employed in aircraft landing gear systems, where they transmit torque from the hydraulic motor to extend or retract the landing gear. Bevel gears are also found in helicopter rotor systems, providing the necessary power transmission to rotate the rotor blades.
  • Railway Systems: Bevel gears play a crucial role in railway systems, particularly in locomotives and rolling stock. They are used in the transmission systems to transfer power from the engine to the wheels. Bevel gears ensure smooth and efficient power transfer, enabling the train to move forward or backward while negotiating curves on the track.
  • Industrial Machinery: Bevel gears are extensively employed in various industrial machinery, such as milling machines, lathes, and industrial robots. They facilitate changes in direction and speed of rotational motion, enabling precise positioning, accurate cutting, and smooth operation of the machinery.
  • Mining and Construction Equipment: Bevel gears are used in mining and construction equipment to transfer power and torque in heavy-duty applications. They are found in equipment such as excavators, bulldozers, and crushers, where they provide reliable power transmission in challenging environments.

These are just a few examples of the applications of bevel gears. Their ability to transmit power, change the direction of rotational motion, and accommodate intersecting shafts makes them versatile and suitable for a wide range of industries and mechanical systems.

In summary, bevel gears are extensively utilized in automotive differentials, mechanical power transmission systems, marine propulsion systems, aerospace applications, railway systems, industrial machinery, and mining and construction equipment. Their applications span across industries where changes in direction or speed of rotational motion are essential for efficient and reliable operation.

China Good quality CZPT Wheel Loader Bevel Gear 41c0605X1 worm gearboxChina Good quality CZPT Wheel Loader Bevel Gear 41c0605X1 worm gearbox
editor by CX 2023-09-25

Tags